Extrusion of PE-Xa pipes

Line competence from a single source

The three success factors for PE-Xa pipe extrusion are the raw material/formulation, the extrusion process and the cross-linking technology. Here, battenfeld-cincinnati concentrates mainly on the extrusion part. Materials and the cross-linking equipment are taken care of by close cooperation with well-known partner companies.

battenfeld-cincinnati currently offers pipe dies for PE-Xa processing in two different sizes:

  • Pipe head RK32PEX for external pipe diameters of up to 32 mm
  • Pipe head RK63PEX for external pipe diameters of up to 63 mm
  • Depending on the field of application for the pipes, it is also possible to produce 3-, 4- or 5-layer pipes by using co-extrusion.

battenfeld-cincinnati currently offers three different extruder sizes for processing PE-Xa:

  • conEX 50 PE-Xa with 30 to 50 kg/h throughput
  • twinEX 72-26 PE-Xa with 60 to 90 kg/h throughput
  • twinEX 93-28 PE-Xa with 100 to 150 kg/h throughput
  • Optimal melt quality
  • Maximum throughput
  • Long production cycles
  • Complete line from a single source
  • Counseling and support concerning suitable formulations and material preparation



Please select the language of your choice.

  • 01 PE-Xa Line EN (2 MB)
  • 02 PE-Xa Line DE (2 MB)
  • 01 application pipe EN (4 MB)
  • 02 application pipe DE (4 MB)